Atecpool Ozone Generator

Atecpool Ozone generator produces high-concentration ozone and avoids risk of burning the circuit, by which ozone is maintained effectively through corona discharge.
The ozone reactor with a high-voltage discharging unit is a micro-gap corona discharging structure composed of ceramic-Ti alloy material. By virtue of module design, the standard power supply has a working frequency of 4~6KHz, which enables stable yield of ozone and a conversion rate of more than 5%. Under normal situations, there is no ozone yield diminishing after continuous operation for 10,000 h.

Components

Stainless steel case or a carbon steel case with epoxy coating
Built-in PSA oxygen generator
Built-in oil less air compressor
Ceramic reaction chamber with wind cooling
Standard power module of high frequency and pressure
Ventilation system.

Technical Parameters

Ozone production: 1-500 gm/hr
Cooling mode: Built-in air cooling
Air inlet dew point: -60°C
Power supply: AC220V/380V
Resistance to earth: ≤4Ω
Ozone concentration: 50-105mg/L
Ambient relative humidity: ≤85%
Ambient temperature: 1°C ~ 53°C
Yield adjustment: 0-100%
Leakage concentration: ≤ 0.05ppm

Model	Ozone Output	Ozone Concentration	Pool Size	Nominal Loading	Power	Dimensions	Weight
ATOZO3-1	1 g/h	0–50 mg/L	Up to 12,000 US gal / Spas up to 1,000 US gal	Up to 24,000 US gal	550 W	600 × 300 × 1030 mm	53 kg
ATOZO3-2	2 g/h	0–50 mg/L	Up to 24,000 US gal / Spas up to 2,000 US gal	Up to 48,000 US gal	550 W	600 × 300 × 1030 mm	53 kg
ATOZO3-5	5 g/h	0–50 mg/L	Up to 60,000 US gal / Spas up to 5,000 US gal	Up to 120,000 US gal	550 W	600 × 300 × 1030 mm	53 kg
ATOZO3-10	10 g/h	0–50 mg/L	Up to 120,000 US gal	Up to 240,000 US gal	650 W	600 × 300 × 1030 mm	53 kg
ATOZO3-15	15 g/h	0–80 mg/L	Up to 180,000 US gal	Up to 360,000 US gal	700 W	600 × 300 × 1030 mm	53 kg
ATOZO3-20	20 g/h	0–100 mg/L	Up to 240,000 US gal	Up to 480,000 US gal	850 W	600 × 300 × 1030 mm	55 kg
ATOZO3-30	30 g/h	0–105 mg/L	Up to 360,000 US gal	Up to 720,000 US gal	950 W	600 × 300 × 1030 mm	55 kg