Flow Line

DAGEN Complete Assembly Free Chlorine (PPM)
DAGEN complete assembly includes the following modules: Wi-Fi, free chlorine control, flow detector, temperature module, suction lance, TDS analyser, pH control, pH dosing pump, flocculation pump for APF® (Active Poly Floc).

DAGEN Complete Assembly RX
DAGEN is also available configured with Redox control instead of free chlorine. DAGEN complete RX includes the following modules: Wi-Fi, redox control, flow detector, temperature module, suction lance, TDS analyser, pH control, pH dosing pump, flocculation pump for APF® (Active Poly Floc).

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

  1. Control Panel   
  2. Free chlorine cell with rotameter
  3. Cell (always in vertical position if installed without paddle flow switch 6)
  4. pH probe
  5. Redox probe and/or conductivity probe
  6. Paddle flow switch and temperature module
  7. APF® dosing pump
  8. pH dosing pump
  9. pH injection
  10. Prefilter
  11. Wifi Module
  12. APF® (not included)
  13. pH-Minus (not included)
  14. If Outdoor pool: ACO® (not included)
  15. Besgo valve (not included)

 

[wrt_print_rt_wp_responsive_tabs tabset_id=”353″]

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Salt Water Electrolysis Automation Enabled Salt Chlorinator

Atecpool Automation Enabled – DAGEN Salt Water Electrolysis & Hydrolysis Atecpool Automation Enabled Salt Chlorinator use mainly free radicals for disinfection and a small amount of free chlorine for residual disinfection, the unit maintain the salinity (TDS) at the lowest possible level. With a salinity (TDS) of only 800 – 1500 mg/l (0.8 – 1.5kg/ of salt per m3), DAGEN Salt Chlorinator will produce a lot of free radicals and enough chlorine for residual disinfection.
Instead of using only regular salt (NaCl), its recommended to use 25-50% DAGEN Activator of magnesium chloride (MgCl2).
DAGEN Activator not only raises the salinity to the desired level, it increases the hardness of the water and it also removes phosphates from the water. Phosphates are nutrients for algae and bacteria. Usually only about 1kg of salt (NaCl) and or DAGEN Activator (MgCl2) per m3 of pool water volume is required. This small amount of minerals also ensures that chloride levels (Cl-) remain below 600ppm, which is the corrosion limit for stainless steel 1.4571 (316).

Description

DAGEN Complete Assembly Free Chlorine (PPM)
DAGEN complete assembly includes the following modules: Wi-Fi, free chlorine control, flow detector, temperature module, suction lance, TDS analyser, pH control, pH dosing pump, flocculation pump for APF® (Active Poly Floc).

DAGEN Complete Assembly RX
DAGEN is also available configured with Redox control instead of free chlorine. DAGEN complete RX includes the following modules: Wi-Fi, redox control, flow detector, temperature module, suction lance, TDS analyser, pH control, pH dosing pump, flocculation pump for APF® (Active Poly Floc).

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

  1. Control Panel   
  2. Free chlorine cell with rotameter
  3. Cell (always in vertical position if installed without paddle flow switch 6)
  4. pH probe
  5. Redox probe and/or conductivity probe
  6. Paddle flow switch and temperature module
  7. APF® dosing pump
  8. pH dosing pump
  9. pH injection
  10. Prefilter
  11. Wifi Module
  12. APF® (not included)
  13. pH-Minus (not included)
  14. If Outdoor pool: ACO® (not included)
  15. Besgo valve (not included)

 

[wrt_print_rt_wp_responsive_tabs tabset_id=”353″]

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Related Products

DAGEN Complete Assembly Free Chlorine (PPM)
DAGEN complete assembly includes the following modules: Wi-Fi, free chlorine control, flow detector, temperature module, suction lance, TDS analyser, pH control, pH dosing pump, flocculation pump for APF® (Active Poly Floc).

DAGEN Complete Assembly RX
DAGEN is also available configured with Redox control instead of free chlorine. DAGEN complete RX includes the following modules: Wi-Fi, redox control, flow detector, temperature module, suction lance, TDS analyser, pH control, pH dosing pump, flocculation pump for APF® (Active Poly Floc).

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

  1. Control Panel   
  2. Free chlorine cell with rotameter
  3. Cell (always in vertical position if installed without paddle flow switch 6)
  4. pH probe
  5. Redox probe and/or conductivity probe
  6. Paddle flow switch and temperature module
  7. APF® dosing pump
  8. pH dosing pump
  9. pH injection
  10. Prefilter
  11. Wifi Module
  12. APF® (not included)
  13. pH-Minus (not included)
  14. If Outdoor pool: ACO® (not included)
  15. Besgo valve (not included)

 

[wrt_print_rt_wp_responsive_tabs tabset_id=”353″]

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Select Country »